Clocks are not meant for playing football. Nor for throwing. But children will be children. What to do when your clock has fallen and the pointers have fallen off?
Do not panic: just follow the instructions and you will be able to replace the pointers within a few minutes!
To disassemble the feet, please prepare a flat screwdriver and follow the steps below:
1. Use the Flat screwdriver to push down on both click-on locks

2. Push and raise the two released click-on locks from below using the flat screwdriver

3. Push the foot from the outside towards the inside with your finger. At the same time, use the flat screwdriver to raise the middle section of the foot

4. Remove the foot, and disassemble the other two feet in the same way

5. ROTATE the transparent cap, and remove it

6. Place the hands back on the clockdrive. Make sure that there is a little space between the three hands , but also make sure you press the second hand on firmly enough. You should be able to turn the clock upside down and shake it without the hands falling off

7. Place the transparent bubble back on (note: the “6” should point to the drawer) and rotate the transparant bubble clockwise until firmly in place

8. Click the feet on again

Do you need different cards for your Clock? Download here empty cards.
Print the page, draw and colour the items. If you cut the cards and glue them on cardboard, you can use them in your Clock! Did you make some drawings yourself? We are looking forward to seeing your designs!
Do you need more cards for your Clock? You can download them here.
Download Card Fairy |
Download Card Boy |
Download Card Bear |
Download Card Duck |